Free Shipping
The Seizmik Halo-RA LED Rearview Mirror features multimodal, high intensity RGB LEDs and a high intensity COB (Circuit On Board) LED map light along with a powder coated cast aluminum bezel and an ABS rear housing. The result is a strong, lightweight, and durable mirror with a convenient hands free cab light.
The programmable RGB lights include a high and low intensity level in red, green, and blue color selections.
Red and Green LEDs are for use when preserving visual acuity in low light scenarios, while the blue may be used to match dash accent lights.
The powder coated cast aluminum bezel may be removed and the convex safety glass may be replaced without having to replace the whole mirror.
Like all Seizmik mirrors, the Halo-RA LED Rearview Mirror is covered under Seizmik’s 100% Unlimited Lifetime Mirror Warranty.
LED Features include:
- IP65 WEATHER RESISTANT HOUSING—Will withstand washing with a hose, but don’t submerge it!
- SCRATCH RESISTANT POLYCARBONATE LENSES—For years of reliable performance.
- HIGH INTENSITY RGB PROGRAMMABLE LIGHTS—Set preferred color for functional or accent lighting: red for night vision or accent; green for night vision or accent; or blue for accent.
- HIGH INTENSITY COB MAP LIGHT—2 intensity settings: 30 Lumen Low or 120 Lumen High.
- OPERATES ON 4 AAA BATTERIES—4 AAA Duracell batteries included.
Mirror Features include:
- SOLID CAST ALUMINUM COMPONENTS—Powder Coated Cast Aluminum for lightweight performance and durability.
- 304 STAINLESS STEEL HARDWARE—High Grade Corrosion Resistant Hardware for years of reliable trouble free performance.
- LOW PROFILE HINGED CLAMP—Clamp design provides extreme clamping power, minimal interference with other accessories, and a simple installation.
- STAINLESS STEEL BALL STUD LOCK BOLTS—Set Bolts can lock mirror into plate or be adjusted to allow for smooth movement
- CAST ALUMINUM LOCKING BLOCK—Locking block and bolts lock ball stud in place to prevent unwanted movement under the roughest condition.
- SHATTER RESISTANT SAFETY GLASS—For maximum safety.
- CONVEX MIRROR GLASS—Convex surface provides super wide viewing range with added image stability.
Part# 18001
- Polaris RZR Pro XP 2 Seat, RZR Pro XP 4 Seat
- Polaris RZR Turbo R 2 Seat, RZR Turbo R 4 Seat
- Polaris RZR Pro R 2 Seat, Pro R 4 Seat
- Polaris RZR XP 1000 (2024+)
Part# 18019
- Any 1.75″ ROPS; Honda Pioneer 1000; Polaris Round Tube Ranger (Full and Midsize); Polaris General; Polaris RS1; Polaris RZR (all but Pro XP)
- Any 1.75" ROPS; John Deere Gator; Textron Wildcat (Round Tube roll cage models only)
- WILL NOT FIT 2024 POLARIS RZR XP/XP 4 1000
Part# 18020
Any 1.875″ or 2″ ROPS; Honda Talon; Kawasaki Teryx 750/800, Kubota RTV-RTV X models, UForce 600 with Round Tube roll cage
Part# 18021
- Polaris Pro-Fit Ranger Factory Header Panel
- Polaris Pro-Fit Ranger (Full and Midsize)
Part# 18022
- Can-Am X3 Factory Mirror Mounting Plate
- Can-Am X3
Part# 18023 NOTE - Mirror will not fit on Model equipped with Factory Headliner/ Wiper Kit
- Can-Am Defender Factory Header Panel
- Can-Am Defender
Part# 18032
- CF Moto UForce 1000 3-seat ONLY
- Will not fit UForce XL 1000
RETURN POLICY
- Items must be returned within 30 days of receiving them
- Windshields with the protective covering removed are not returnable
- Special ordered & custom items are non-returnable
- All return expenses are the responsibility of the customer unless the incorrect part was shipped in error
- Exchanges will not be shipped until the return has been received
- A restock fee may be applicable depending on the situation/manufacturer
- RE-STOCK FEES below are the MINIMUM manufacturer charges deducted from your refund
- The Original shipping cost will be applied to any returned order that received free shipping when the order was placed
- All items must be returned in new/undamaged/uninstalled condition in original packaging
- All returns must be inspected by our team before a refund/exchange will be processed
- Returned items that do not meet these requirements may be denied a refund/exchange
-We ask for your year, make and model at the end of you order. We are not required to check fitment on the products that you selected. It is ultimately the customers responsibility to check fitment on all products they are ordering to make sure it will fit their vehicle. Fitment information (Year, Make and Model) are listed on each product page, if you are not sure you are always more than welcome to give us a call and speak to someone in our sales department.
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (5 to 10 business days), and the time it takes your bank to process our refund request (24 to 48 hours).
If you need to return an item(s) please CLICK HERE FOR THE RETURN REQUEST FORM.
***Return Authorization emails are sent to customer within 2 business days. Remember to check ALL EMAIL FOLDERS after 48 hours as they do not always go into your inbox, if you still do not see it please give us a call***
