Polaris RZR 4 1000-Turbo 8" Portal Gear Lift
FITMENT
- Polaris RZR XP 4 Turbo : 2016+
- Polaris RZR XP 4 1000 : 2014+
For Polaris XP 1000 2017 Models: Please check the bolt size of the hardware that fastens the RSL to the brace plate (see image below). Select the socket size that corresponds to your OEM size.
FEATURES
- 1.5 in. forward and rear offset
- 9310 billet steel alloy precision ground gears are cool and quiet
- 1.5 in. diameter 4340 hardened steel drive shaft
- No Leak Bearings and Seals
- Universal Hub. Fits All Major bolt patterns
- Comes complete with all hardware, backing plates, brakes lines and instructions
- Available with billet or cast aluminum housing
- 22" or larger wheel required
- Wheels cannot exceed 5" backspacing
Gear Down and Go Big
SuperATV’s GDP 8” Portal Gear Lift for the Polaris RZR XP 1000 is geared down so you can go big. It gives you a lift and a 45% gear reduction in one box. Get the clearance to run bigger tires and the torque you need to turn them. The lift and gear reduction are in the hub, so they maintain suspension geometry and reduce drivetrain stress. With huge clearance and huge torque, you can install monster tires to take on any challenge.
Perfect for Mud
With 8” portals and a 45% gear reduction, you get clearance for huge tires and a massive boost in torque. It’ll turn monster tires like they’re stock. You’ll be able to take on any mud anywhere and take home the bounty. Our 8” portals let you roll over the other guy’s machine — literally.
Perfect for Rocks
Get tons of torque to crawl over any rock or boulder you can find by installing an 8” portal box with a 45% gear reduction. With that much power, rock shelves will feel like speed bumps and boulders feel like pebbles. With 8” of clearance, you can run monster tires and you spend less time scraping your skid plate on every obstacle.
Better Gears
Our gears are precision ground and made with 9310 billet steel alloy.They’re designed to take all the torque and abuse you can give them without chipping teeth or blowing up. Our precise design and manufacturing mean they’re cool and quiet even when you’re hammering down the throttle in the mud hole.
Billet Housings
Choose billet or cast aluminum housings to finish your portals. Our billet housings are CNC machined right here in Madison, Indiana and give you increased strength and consistency over cast. Plus, they look good painted with mud.
Reinforce Your UTV with a Frame Stiffener
We highly recommend running a SuperATV Frame Stiffener with your 8" Portal Gear Lift. The stock frame just doesn't have what it takes. Bump too hard and the OEM frame will bend. Trust us — we've done it. A frame stiffener reinforces your frame enough to let you ride your 8" portals with monster tires and no worries.
| RZR XP1000 Portal Suspension Recommendations | |
|---|---|
| Tire Size | Required Suspension Setup with 8" Portals |
| 40" | Stock |
| 42" | 1.5" Forward Front A Arms |
| 44" | 1.5" Forward Front A Arms and���������������������������������������������������������������������������������3" Lift Kit |
| 50" | 7-10" Lift Kit |
RETURN POLICY
- Items must be returned within 30 days of receiving them
- Windshields with the protective covering removed are not returnable
- Special ordered & custom items are non-returnable
- All return expenses are the responsibility of the customer unless the incorrect part was shipped in error
- Exchanges will not be shipped until the return has been received
- A restock fee may be applicable depending on the situation/manufacturer
- RE-STOCK FEES below are the MINIMUM manufacturer charges deducted from your refund
- The Original shipping cost will be applied to any returned order that received free shipping when the order was placed
- All items must be returned in new/undamaged/uninstalled condition in original packaging
- All returns must be inspected by our team before a refund/exchange will be processed
- Returned items that do not meet these requirements may be denied a refund/exchange
SuperATV - 30%
-We ask for your year, make and model at the end of you order. We are not required to check fitment on the products that you selected. It is ultimately the customers responsibility to check fitment on all products they are ordering to make sure it will fit their vehicle. Fitment information (Year, Make and Model) are listed on each product page, if you are not sure you are always more than welcome to give us a call and speak to someone in our sales department.
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (5 to 10 business days), and the time it takes your bank to process our refund request (24 to 48 hours).
If you need to return an item(s) please CLICK HERE FOR THE RETURN REQUEST FORM.
***Return Authorization emails are sent to customer within 2 business days. Remember to check ALL EMAIL FOLDERS after 48 hours as they do not always go into your inbox, if you still do not see it please give us a call***
